What Is Advanced Product Quality Planning (APQP)?

Definition

Advanced Product Quality Planning (APQP) is a structured method for planning a new product and the process that makes it, so the part meets every customer requirement from the first production run. It is widely used by automotive suppliers.

APQP in Simple Terms

APQP is a launch plan for quality. Instead of making a part and then finding the problems, a cross-functional team plans quality in from the start: it studies what the customer needs, designs the product and the process, proves the process works and keeps improving once production starts.

The method was published by AIAG and is expected by most automotive OEMs. IATF 16949 builds on the same ideas, and aerospace suppliers use a very similar approach under AS9145.

The 5 Phases of APQP

  1. Plan and define the program: customer requirements, goals and a preliminary process flow.
  2. Product design and development: the DFMEA, drawings and design verification.
  3. Process design and development: the process flow, PFMEA and pre-launch control plan.
  4. Product and process validation: a production trial run, MSA, capability studies and the PPAP submission.
  5. Feedback, assessment and corrective action: reduce variation and record lessons learned.

Each phase ends with a gate review where the team checks every deliverable and decides whether the launch can move on.

Example

A supplier launching a welded seat bracket uses APQP to flag weld strength as a special characteristic in phase 1, adds a design rib after the DFMEA in phase 2, plans a weld test at every setup in the control plan in phase 3, and proves a Cpk of 1.9 on the locating hole before submitting PPAP in phase 4.

Why APQP Matters

  • Problems are found while they are still cheap to fix, on paper rather than on the line.
  • Every team knows what is due, who owns it and when.
  • The customer sees a clear, consistent launch process.
  • PPAP becomes a matter of collecting evidence that already exists.

For a full walkthrough, read our complete APQP guide or the blog post on the 5 APQP phases.

FAQ

Frequently Asked Questions

Still unsure? Ask our team.

What does APQP stand for?

APQP stands for Advanced Product Quality Planning, a structured method for launching new parts so they meet customer requirements from the start of production.

What is the difference between APQP and PPAP?

APQP is the planning process that runs through the whole launch. PPAP is the approval package submitted near the end of APQP to prove the process makes good parts consistently.

Is APQP mandatory?

APQP is not a law, but most automotive customers require it through their customer-specific requirements, so in practice automotive suppliers are expected to use it.

What are the 5 phases of APQP?

The five phases are:

  • Plan and define the program
  • Product design and development
  • Process design and development
  • Product and process validation
  • Feedback, assessment and corrective action
What are the main APQP outputs?

Key outputs include DFMEA, PFMEA, process flow diagram, control plan, MSA studies, initial process capability studies, and the PPAP submission.

Who is responsible for APQP?

A cross-functional team led by a program or quality lead runs APQP, usually with design, manufacturing, quality, purchasing and supplier representatives.

What is the APQP reference manual?

The AIAG APQP and Control Plan manual describes the method. Its third edition was published in 2024, and customers may add their own requirements.

When is APQP needed?

APQP is used for new parts, significant design or process changes, new suppliers or sites, and any launch where the customer requires it.

What is an APQP checklist?

An APQP checklist lists the deliverables for each phase so the team can track status, often shown as green, yellow or red at gate reviews.

Is APQP used outside automotive?

Yes. Aerospace uses a similar approach through AS9145, and many general manufacturers use APQP to plan new product launches.

What is APQP software?

APQP software tracks the deliverables, timing and approvals for each launch and links documents such as FMEAs and control plans, so the team sees status in one place.

Put It Into Practice

Book a demo and see how OperaHive handles this on your own parts, processes and documents.