MSA in Simple Terms
Every measurement includes some error from the gauge, the operator, the method and the environment. If that error is large compared with the tolerance, good parts can be rejected and bad parts accepted. MSA measures that error. It is one of the AIAG core tools and is required during PPAP for the gauges named in the control plan.
Key Elements
| Study | What it checks |
|---|---|
| Bias | Difference between the average reading and a reference value |
| Linearity | Whether bias changes across the measuring range |
| Stability | Whether the system drifts over time |
| Gauge R&R | Repeatability (gauge) and reproducibility (operators) |
| Attribute agreement | Consistency of go/no-go or visual decisions |
In the AIAG MSA manual, a Gauge R&R under 10 percent is generally acceptable, 10 to 30 percent may be acceptable depending on the application, and over 30 percent is unacceptable. The number of distinct categories should be 5 or more.
Example
Three operators measure 10 shafts twice each with a micrometer. The study gives a GRR of 24 percent of tolerance, mostly from reproducibility. The team finds operators measure at different points along the shaft, adds a fixture and a clear method to the work instruction, and a repeat study gives 8 percent.
Common Mistakes
- Choosing parts that do not cover the real process range.
- Running the study only once, at PPAP, and never again.
- Confusing MSA with calibration, which checks accuracy against a standard but not the whole system.
Gauge R&R and MSA records can be kept with calibration data in OperaHive calibration management software.