What Is AS9145?

Definition

AS9145 is the aerospace and defence standard for Advanced Product Quality Planning (APQP) and Production Part Approval Process (PPAP). It defines how suppliers plan, prove and approve new products and processes.

AS9145 in Simple Terms

AS9145 was published by SAE International in 2016, based on IAQG work. It brings the launch discipline of automotive APQP and PPAP to aerospace, while fitting the AS9100 family and aerospace practices such as first article inspection.

The 5 Phases

  1. Planning: customer requirements, risk and project plan.
  2. Product design and development: design FMEA, design reviews and key characteristics.
  3. Process design and development: process flow, PFMEA and control plan.
  4. Product and process validation: measurement system analysis, capability studies, FAI and the PPAP submission.
  5. Ongoing production, use and post-delivery service: lessons learned and continual improvement.

The standard is supported by the IAQG Supply Chain Management Handbook, which gives forms and guidance for each element.

Example

A supplier taking on a new turbine bracket runs a PFMEA and identifies the bore diameter as a key characteristic. It sets up SPC on the bore, completes an AS9102 FAI and submits a PPAP package with the capability study before rate production starts.

AS9145 vs Automotive APQP

  • Phase 5 covers in-service use, reflecting long aerospace product lives.
  • FAI to AS9102 is part of the PPAP evidence.
  • Requirements apply mainly when the customer flows them down in the contract.

The OperaHive APQP software tracks phases, deliverables and gate reviews for a launch. See the AS9145 standard page for more detail.

FAQ

Frequently Asked Questions

Still unsure? Ask our team.

Is AS9145 a certification standard?

No. AS9145 is not certified on its own. Customers flow it down through contracts, and auditors may check it as part of an AS9100 audit.

Does AS9145 replace FAI?

No. First article inspection to AS9102 is still required and forms part of the PPAP evidence under AS9145.

What is AS9145?

AS9145 is the aerospace standard for Advanced Product Quality Planning and Production Part Approval Process. It sets out how to plan and approve new or changed products for aviation, space and defence.

What is the difference between AS9145 and automotive APQP?

Both follow a phased launch model. AS9145 adapts it for aerospace, with five phases, links to AS9102 first article inspection and terms used by aerospace primes.

What are the phases of AS9145?

The five phases are planning, product design and development, process design and development, product and process validation, and ongoing production.

What are the AS9145 deliverables?

Typical deliverables include design and process FMEA, process flow, control plan, MSA, capability studies, first article inspection and a PPAP approval record.

Who requires AS9145?

Many aerospace primes and tier ones, such as engine and airframe makers, require AS9145 from suppliers through purchase order or quality clauses.

When does AS9145 apply?

It applies to new products, significant changes to design or process, moving production to a new site or supplier, and long breaks in production, as defined by the customer.

What is PPAP in AS9145?

PPAP in AS9145 is the evidence package showing the production process consistently makes product meeting requirements at the planned rate.

What are common AS9145 mistakes?

Common gaps are starting the process too late, treating FAI as the full approval, weak capability studies and control plans that do not match the PFMEA.

Put AS9145 Into Practice

Book a demo and see how OperaHive handles this on your own parts, processes and documents.