SPC in Simple Terms
Every process varies a little. SPC separates common cause variation, which is the normal noise of a stable process, from special cause variation, which signals that something has changed, such as tool wear, a new material batch or a wrong setting.
The method was developed by Walter Shewhart in the 1920s and is one of the IATF 16949 core tools, described in the AIAG SPC manual.
How It Works
- Choose the characteristic to monitor, often a special characteristic.
- Collect samples at a set frequency, such as five parts every hour.
- Plot them on a control chart, for example an X-bar and R chart.
- Calculate control limits from the process data, not from the tolerance.
- React to points outside the limits or patterns flagged by run rules.
- Once the process is stable, measure capability with Cp and Cpk.
Example
A grinding line checks the outer diameter of five bearing races every 30 minutes. One afternoon the X-bar chart shows eight points in a row above the centre line, though all parts are in tolerance. The operator finds the coolant temperature has risen, corrects it, and the chart returns to its normal pattern.
Why It Matters
- Problems are caught while parts are still good, which cuts scrap.
- Operators know when to adjust and when to leave the process alone.
- Capability data supports PPAP and customer reviews.
OperaHive SPC software provides X-bar, R, S and I-MR charts, alert rules and capability studies. Read the SPC and Cpk guide for more.