Special Characteristics in Simple Terms
Not every dimension on a drawing matters equally. A special characteristic is one where a deviation could hurt someone, break a law or cause the product to fail. These are marked on drawings and carried through the DFMEA, PFMEA and control plan.
IATF 16949 requires suppliers to identify and control them, and to use the customer's symbols or an agreed equivalent.
Common Types
| Type | Typical meaning | Typical control |
|---|---|---|
| Critical (CC) | Affects safety or legal compliance | Error-proofing or 100% check, records kept |
| Significant (SC) | Affects fit, function or customer satisfaction | SPC with capability targets |
Names and symbols vary by customer. Aerospace uses the term key characteristics for a similar idea.
Example
On a steering knuckle, the hardness of the ball joint seat is marked as a critical characteristic because failure could cause loss of steering. The control plan requires a hardness test on every heat-treat batch with results kept for traceability, and the PFMEA lists the furnace temperature as a related process characteristic.
Common Mistakes
- Marking too many characteristics as special, which dilutes attention.
- Losing the symbol between the drawing, PFMEA and control plan.
- Controlling the product feature but not the process setting that drives it.
OperaHive FMEA software lets teams mark characteristics as CC, SC or other categories used by their organisation and carries them into the control plan.