Quality Inspection Plan in Simple Terms
An inspection plan turns the drawing and the control plan into clear instructions for inspectors. Everyone checks the same things in the same way, and the results can be compared over time.
In automotive work the control plan often serves as the master, and inspection plans give the detailed steps for each inspection station.
Key Elements
- Part number, revision and inspection stage.
- Characteristics to check, with nominal and tolerance.
- Measurement method and gauge.
- Sample size and frequency, for example using an AQL sampling table.
- Accept and reject criteria.
- Reaction plan and how results are recorded.
Example
An incoming inspection plan for machined shafts lists five characteristics. Diameter and length are measured with a calibrated micrometer and height gauge on 13 parts per lot. Surface finish is checked on 3 parts. Hardness is accepted from the supplier certificate. Any failure puts the lot on hold and raises a nonconformance report.
Common Mistakes
- The plan is not updated when the drawing revision changes.
- Gauges listed in the plan have not been checked by MSA.
- Special characteristics get the same frequency as minor ones.
- No reaction plan, so inspectors do not know what to do with a failed lot.
OperaHive quality inspection software manages incoming, in-process and final inspections against defined plans.