What Is Incoming Inspection?

Definition

Incoming inspection is the check of purchased materials and parts when they arrive from a supplier, to confirm they meet the specification before they are accepted into stock or used in production.

Incoming Inspection in Simple Terms

After a goods receipt, material that needs checking is held until inspection is complete. Inspectors review supplier certificates, check labels and quantities, and measure or test a sample against the drawing and the inspection plan. Good material is released; bad material is quarantined.

Common Methods

MethodWhen it is used
100 percent inspectionCritical parts, new suppliers or after problems
Sampling by AQLRoutine lots, using a sampling plan such as ISO 2859-1
Skip-lot inspectionSuppliers with a proven good record
Certificate review onlyLow-risk items backed by certificates of conformity

See Acceptable Quality Limit for how sample sizes and accept numbers are chosen.

Example

A lot of 2,000 machined pins arrives. Under the sampling plan, the inspector measures 125 pins and finds 4 outside the diameter tolerance, which exceeds the accept number. The lot is rejected and quarantined, a nonconformance report is raised, and a SCAR is sent to the supplier.

Why It Matters

  • It stops supplier defects before they reach the line or the customer.
  • Results feed supplier quality management and vendor rating.
  • Inspection effort can be reduced for proven suppliers.

OperaHive quality inspection software manages incoming, in-process and final inspections and monitors supplier quality.

FAQ

Frequently Asked Questions

Still unsure? Ask our team.

What is the purpose of incoming inspection?

To confirm that purchased material meets requirements before it is used, so supplier defects do not enter production.

Is incoming inspection required by ISO 9001?

ISO 9001 requires organisations to verify that externally provided products meet requirements. Incoming inspection is one common way to do this, but not the only one.

What is incoming inspection?

Incoming inspection, also called receiving inspection, is the checking of purchased raw materials, parts and components on arrival to confirm they meet specifications before they are used in production.

What is the difference between incoming inspection and receiving inspection?

There is no real difference. Incoming inspection, receiving inspection and goods inward inspection are used interchangeably for checking supplier material at receipt.

How do you do incoming inspection?

Check paperwork such as certificates of conformance, verify identification and quantity, take a sample per the inspection plan, measure or test key characteristics, then accept, reject or hold the batch and record the result.

What sampling plan is used for incoming inspection?

Many companies use ANSI/ASQ Z1.4 (based on MIL-STD-105) with an AQL, or zero acceptance plans such as C=0. The sample size depends on lot size, inspection level and risk.

What is skip lot inspection?

Skip lot inspection reduces checks for suppliers with a proven quality record, inspecting only some lots. It returns to normal inspection if a rejection occurs.

What happens when incoming material fails inspection?

The material is quarantined and labelled, a nonconformance is raised, and the supplier is notified. Options include return, rework, sorting or a concession, often with a supplier corrective action request.

Who is responsible for incoming inspection?

The quality department usually owns incoming inspection, with receiving inspectors doing the checks. Purchasing and supplier quality engineers handle follow-up with the supplier.

What is an incoming inspection checklist?

It lists what to verify for each part: documents, labels, packaging, quantity, visual checks, dimensions, material certificates and the sample size, with space to record results and the decision.

How can incoming inspection be reduced?

By developing suppliers, using source inspection, reviewing supplier certificates and data, and moving reliable suppliers to skip lot or dock-to-stock status.

Put Incoming Inspection Into Practice

Book a demo and see how OperaHive handles this on your own parts, processes and documents.