Quality Control in Simple Terms
QC looks at the product. It measures, tests and inspects parts against the drawing and specification, then decides whether to accept, reject or hold them. Where quality assurance tries to prevent problems, QC finds them.
Where QC Happens
| Stage | Purpose | Typical checks |
|---|---|---|
| Incoming | Check bought-in material | Certificates, sampling, dimensions |
| In-process | Catch problems early | First-off, patrol checks, SPC |
| Final | Confirm before shipping | Full dimensional, function, appearance |
See incoming inspection and in-process inspection for more on each stage.
Example
A plastics moulder checks the first five parts after every mould change against a checking fixture, takes hourly samples for wall thickness on an SPC chart, and runs a final visual check on every part before packing. When a short shot is found, the batch since the last good check is quarantined and a nonconformance report is raised.
Common Mistakes
- Relying on final inspection alone, which finds problems late and at high cost.
- Using gauges with no calibration or measurement system study.
- Recording results on paper that nobody reviews for trends.
- Treating QC as a separate department rather than part of the process.
OperaHive quality inspection software manages incoming, in-process and final inspections with clear accept and reject decisions.