What Is Nonconformance Report (NCR)?

Definition

A Nonconformance Report (NCR) is a record raised when a product, material or process does not meet a specified requirement. It documents the problem, the affected items and the decision on what to do with them.

NCR in Simple Terms

When an inspector finds a part out of tolerance, a wrong material or a missed process step, an NCR captures it. The suspect items are identified and held so they cannot be used by mistake, and a review decides their fate. Controlling nonconforming output is required by ISO 9001, IATF 16949 and AS9100.

How It Works

  1. Identify: describe the nonconformance, the requirement, the quantity and where it was found.
  2. Contain: tag and quarantine suspect stock, as a containment action.
  3. Disposition: decide to rework, repair, scrap, return to supplier or use as is. Use as is or repair usually needs engineering approval, and often customer approval through a deviation.
  4. Correct: if the problem is significant or repeats, raise a CAPA to remove the root cause.
  5. Close: record the outcome and the cost.

Example

Incoming inspection finds 120 of 2,000 machined covers with a hole 0.1 mm undersize. The inspector raises an NCR, quarantines the lot and sorts it. The 120 parts are returned to the supplier, the rest are released, and a SCAR asks the supplier for a root cause and corrective action.

Why It Matters

NCRs stop bad parts reaching the customer and create the data for trend analysis and cost of poor quality. OperaHive quality inspection software records nonconformances from inspections and follows the corrective actions.

FAQ

Frequently Asked Questions

Still unsure? Ask our team.

What is the difference between an NCR and a CAPA?

An NCR records a specific nonconforming product and decides what to do with it. A CAPA addresses the root cause so the problem does not happen again. One CAPA may cover several NCRs.

What are the disposition options for an NCR?

Typical options are rework, repair, scrap, return to supplier and use as is. Repair and use as is normally need engineering or customer approval.

What is an NCR in quality?

An NCR, or nonconformance report, is a record that documents a product, material or process that does not meet a specified requirement, along with how it was handled.

What does NCR stand for in manufacturing?

NCR stands for nonconformance report or nonconformity report. Some companies call it a nonconforming material report.

What should an NCR include?

A typical NCR includes:

  • Part number, lot and quantity
  • Requirement and actual condition
  • Where and how it was found
  • Containment taken
  • Disposition and approval
  • Link to corrective action if needed
What are NCR disposition options?

Common dispositions are use as is, rework, repair, return to supplier, regrade and scrap. Use as is and repair usually need engineering or customer approval.

Who raises an NCR?

Anyone who finds a nonconformance can raise it, typically inspectors, operators, receiving staff or quality engineers. Quality usually owns the review and closure.

Who can close an NCR?

An NCR is usually closed by quality once the disposition is complete, the affected parts are dealt with and any required corrective action has been raised. Many companies require a second approval for scrap or use-as-is decisions.

What is an NCR example?

Receiving inspection finds 50 shafts from a supplier are 0.05 mm over diameter. An NCR records the defect, quarantines the parts and dispositions them as return to supplier.

What are NCR requirements in AS9100?

AS9100 requires control of nonconforming outputs, including identification, segregation and documented disposition. Use as is or repair dispositions need authorisation and, where required, customer approval.

Put Nonconformance Report (NCR) Into Practice

Book a demo and see how OperaHive handles this on your own parts, processes and documents.