What Is Supplier Corrective Action Request (SCAR)?

Definition

A Supplier Corrective Action Request (SCAR) is a formal request asking a supplier to investigate a quality problem with its product, find the root cause and put in place a lasting fix. It is the supplier side of a CAPA process.

SCAR in Simple Terms

When a purchased part fails incoming inspection, causes a line stoppage or reaches the customer, the buyer does not just return it. A SCAR tells the supplier what went wrong and asks for a written response by a set date.

Most customers expect the response in a structured format such as the 8D method, covering containment, root cause analysis and corrective action.

How It Works

  1. Issue: the customer records the defect, quantity, lot and evidence and sends the SCAR.
  2. Contain: the supplier sorts stock at its site, in transit and at the customer.
  3. Investigate: the supplier finds why the defect occurred and why it was not detected.
  4. Correct: actions are taken, and the PFMEA and control plan are updated.
  5. Verify and close: the customer checks that the fix works, often over several deliveries, before closing the SCAR.

Example

Incoming inspection finds 40 bushes with an undersize outside diameter. The buyer issues a SCAR. The supplier sorts 2,000 parts in stock, traces the cause to a worn insert with no tool life limit, sets a change interval and adds a gauge check every 50 parts. After three clean deliveries the SCAR is closed.

Why It Matters

  • It moves the problem to the party that can fix it.
  • It creates a record used in vendor rating and supplier reviews.
  • It prevents the same defect coming back in the next delivery.

In OperaHive, rejected inspections create a quality notification and supplier rejection report through OperaHive quality inspection software.

FAQ

Frequently Asked Questions

Still unsure? Ask our team.

What is a SCAR in quality?

A SCAR is a formal request sent to a supplier after a nonconforming part or process failure. It asks the supplier to contain the problem, find the root cause and put permanent corrective actions in place.

What does SCAR stand for?

SCAR stands for Supplier Corrective Action Request, a formal request for a supplier to find the root cause of a defect and fix it.

SCAR vs CAPA: what is the difference?

A CAPA is raised for problems inside your own organisation. A SCAR is raised against a supplier when the cause sits in their process.

How long does a supplier have to respond to a SCAR?

It depends on the customer. A common pattern is containment within 24 to 48 hours and a full root cause and action plan within a few weeks.

When should you issue a SCAR?

Issue a SCAR when a supplier defect reaches your plant or customer, when a problem repeats, or when the impact on safety, cost or delivery is significant. Minor one-off issues are often handled with a simple notification instead.

What should a SCAR response include?

A complete response usually covers:

  • Containment of suspect stock
  • Root cause for occurrence and escape
  • Corrective actions with owners and dates
  • Evidence that the actions worked
Is a SCAR the same as an 8D report?

No. The SCAR is the request; an 8D is a common format the supplier uses to answer it. Many customers ask for the SCAR response in 8D form.

Who closes a SCAR?

The supplier quality engineer at the customer usually closes the SCAR after reviewing the root cause, the actions and evidence that the problem has not returned.

What are common SCAR mistakes?

Accepting "operator error" as the root cause, closing the SCAR before actions are verified, and issuing so many SCARs for minor issues that suppliers stop treating them seriously.

How do SCARs affect supplier ratings?

Many manufacturers count open or late SCARs in the supplier scorecard. Repeated SCARs can lower the rating and lead to extra audits or controlled shipping.

Put It Into Practice

Book a demo and see how OperaHive handles this on your own parts, processes and documents.