CAPA in Simple Terms
When a defect, complaint or audit finding appears, fixing the bad parts is only the start. CAPA asks why it happened and changes the process so the cause is removed. Preventive action applies the same thinking to risks that have not yet caused a problem.
| Term | What it does | Example |
|---|---|---|
| Correction | Fixes the immediate problem | Sort and rework the bad lot |
| Corrective action | Removes the cause of an actual problem | Add a sensor that stops the press on a missed feed |
| Preventive action | Removes the cause of a potential problem | Add the same sensor to similar presses |
How It Works
- Describe the problem and its scope.
- Take containment action to protect the customer.
- Find the root cause with tools such as 5 Whys or a fishbone diagram.
- Plan and carry out the corrective action.
- Verify that the action worked.
- Update the FMEA, control plan and work instructions, and close the record.
Many automotive customers expect this to follow the 8D format.
Example
A customer returns brackets with a missing hole. Containment sorts all stock. Root cause analysis finds a broken punch that the press did not detect. The corrective action adds a part-present sensor, the PFMEA and control plan are updated, and three months with no repeat defects confirm the action worked.
Common Mistakes
- Naming operator error as the root cause and closing with retraining.
- Closing the record before checking effectiveness.
- Not updating the FMEA and control plan.
The OperaHive quality inspection software records nonconformances and follows corrective actions through to closure.