Containment in Simple Terms
When a defect is found, the first job is to stop more bad parts going out. Containment means finding every place suspect product could be, holding it, and checking it before it moves on. In the 8D method this is D3, the interim containment action.
Where to Contain
- Work in progress on the line.
- Finished goods in the warehouse.
- Parts in transit.
- Stock at the customer, including their warehouse and line side.
- Supplier stock if purchased material is the suspect.
Typical actions include quarantine, 100 percent sorting, extra inspection, and marking checked parts so they can be told apart. Batch traceability helps define exactly which lots are suspect.
Example
An operator finds a cracked casting at final inspection. The supervisor stops the line, tags all castings from the same supplier lot, and the quality team sorts 1,800 parts in the warehouse and 400 at the customer. Clean parts get a green dot so the customer knows they were checked. Sorting stays in place until the corrective action is proven.
Common Mistakes
- Forgetting parts in transit or at the customer.
- Treating containment as the fix and never finding the root cause.
- Removing containment before the corrective action is verified.
Containment buys time for root cause analysis and CAPA. The OperaHive quality inspection software records nonconformances and follows the corrective actions that come after.