What Is Scrap Rate?

Definition

Scrap Rate is the share of material or parts produced that cannot be used or reworked and must be thrown away or recycled, usually given as a percentage of total output or input.

Scrap Rate in Simple Terms

Scrap rate shows how much of what a plant makes ends up in the bin. It is one of the most direct measures of waste, and every scrapped part carries the cost of the material, machine time and labour already spent on it.

It is closely related to yield and first pass yield, and is a large part of the cost of poor quality.

How to Calculate It

  • By parts: scrap rate = scrapped parts divided by total parts produced, times 100.
  • By weight or value: useful where scrap includes runners, offcuts or setup material.

Decide early whether setup parts and rework are included, and keep the definition the same across lines so results can be compared.

Example

A moulding cell makes 12,000 parts in a week. 300 are scrapped for short shots and 60 for flash. The scrap rate is 360 divided by 12,000, or 3%. A Pareto chart shows short shots are most of the problem, so the team looks first at material drying and the hold pressure setting.

How to Reduce Scrap

  • Record scrap by reason code, machine and shift, not only as a total.
  • Use SPC to catch drift before parts go out of tolerance.
  • Run root cause analysis on the top reasons.
  • Mistake-proof setups and changeovers, where much scrap is made.

OperaHive manufacturing execution system tracks shop-floor output against work orders, which gives the counts scrap rate is based on.

FAQ

Frequently Asked Questions

Still unsure? Ask our team.

What is scrap rate?

Scrap rate is the percentage of parts or material produced that cannot be used or reworked and must be discarded.

How do you calculate scrap rate?

Scrap rate equals scrapped units divided by total units produced, multiplied by 100. For example, 30 scrapped out of 1,500 made is a 2% scrap rate.

What is a good scrap rate?

It depends on the process and industry. Many machining and assembly operations aim for well under 1%, while processes with high setup losses may run higher.

Is rework counted as scrap?

No. Reworked parts are usually tracked separately, because they are recovered, though both count toward cost of poor quality.

Scrap rate vs yield: what is the difference?

Yield is the share of good output from total input. Scrap rate is the share lost as waste. If rework is excluded, yield and scrap rate add up to 100%.

What causes a high scrap rate?

Common causes are poor setups, worn tools, unstable processes, operator error, bad raw material, unclear specifications and weak first-off checks.

How do you reduce scrap rate?

Track scrap by reason and part, use a Pareto chart to find the largest causes, apply root cause analysis, add error-proofing and SPC, and improve setup checks.

How do you calculate the cost of scrap?

Multiply scrapped quantity by the cost built into each part at the point it was scrapped, including material, labour and machine time, plus any disposal cost.

Should scrap rate be measured by weight or by count?

Count is common for discrete parts. Weight or value is often used for material-based processes such as casting, sheet metal or plastics, and value shows financial impact best.

Who is responsible for tracking scrap rate?

Production usually records scrap at the machine, and quality or operations management review the data and lead improvement actions.

Put Scrap Rate Into Practice

Book a demo and see how OperaHive handles this on your own parts, processes and documents.