What Is Yield?

Definition

Yield is the share of units that come out of a process as good product, compared with the number that went in. It is usually expressed as a percentage.

Yield in Simple Terms

If 1,000 parts start a process and 960 good parts come out, the yield is 96 percent. The other 40 were scrapped, or reworked, depending on how yield is defined. Yield is the mirror image of the scrap rate.

How to Calculate It

MeasureFormulaWhat it shows
Process yieldGood units out / units inFinal output after rework
First pass yieldUnits good first time / units inOutput with no rework or repair
Rolled throughput yieldFPY of step 1 x FPY of step 2 x ...Chance a unit passes every step first time

Process yield can look healthy while hiding a lot of rework. First pass yield and rolled throughput yield expose that hidden work.

Example

A part goes through machining (first pass yield 98 percent), heat treatment (99 percent) and grinding (95 percent). After rework, final yield is 99 percent. But rolled throughput yield is 0.98 x 0.99 x 0.95 = 92.2 percent, so almost 8 in every 100 parts needed rework or were lost somewhere along the line.

Why It Matters

  • Low yield means wasted material, machine time and labour, which adds to the cost of poor quality.
  • Yield by step shows where to focus improvement.
  • Yield feeds the quality rate in OEE.

Accurate yield needs accurate good and scrap counts against each work order, which the OperaHive manufacturing execution system records when it tracks production output.

FAQ

Frequently Asked Questions

Still unsure? Ask our team.

What is yield in manufacturing?

Yield is the share of units that come out of a process as good, compared with the number that went in. It is usually shown as a percentage.

How do you calculate yield?

Yield = good units out / units started x 100. If 1,000 parts start and 950 are good, yield is 95 percent.

Yield vs first pass yield: what is the difference?

Yield usually counts all good units at the end, including reworked ones. First pass yield only counts units that were good the first time without rework.

What is rolled throughput yield?

Rolled throughput yield (RTY) multiplies the first pass yield of every step. Three steps at 95 percent give an RTY of about 86 percent.

What is a good yield in manufacturing?

It depends on the process and industry. Mature machining or assembly processes often run well above 95 percent, while complex or new processes may run lower.

What is the difference between yield and scrap rate?

Scrap rate is the share of units thrown away. Yield is the share that is good, so if nothing is reworked, yield and scrap rate add up to 100 percent.

What causes low yield?

Common causes are process variation, worn tools, poor material, setup errors, unclear work instructions and weak control of key characteristics.

How do you improve manufacturing yield?

Measure yield by step and defect type, use Pareto analysis to find the biggest losses, fix root causes and use SPC to keep key processes stable.

What is yield in semiconductor manufacturing?

In semiconductors, yield is the share of good dies on a wafer. It is very sensitive to contamination and defects, so small changes have a large cost effect.

Is yield the same as OEE quality rate?

They are similar. The OEE quality rate is good units divided by total units produced, which is close to first pass yield for that machine or line.

Put Yield Into Practice

Book a demo and see how OperaHive handles this on your own parts, processes and documents.