Process Flow Diagram in Simple Terms
The process flow diagram (PFD) is the map of how a part is made. Each step gets an operation number, and that same number is used in the PFMEA and the control plan, so the three documents line up.
It is created in phase 3 of APQP and is one of the 18 PPAP elements.
Key Elements
- Operation numbers and names in the order they happen.
- Symbols for operation, inspection, transport, storage and delay.
- Incoming materials and where they join the flow.
- Product and process characteristics at each step.
- Rework, repair and scrap paths, and how nonconforming parts are handled.
Leaving out rework loops and offline inspections is a common gap, because those steps then never get analysed in the PFMEA.
Example
A machined pump body flows as: OP10 receive castings, OP20 incoming inspection, OP30 rough machining, OP40 finish machining, OP50 wash, OP60 leak test, OP70 final inspection, OP80 pack and ship. A rework loop from OP60 returns leaking parts to a sealing station. The PFMEA and control plan both use OP10 to OP80.
Why It Matters
A clear process flow makes sure no step is missed when assessing risk and planning controls. It also helps new team members and auditors understand the line quickly. In OperaHive FMEA software, the PFMEA and control plan are linked, so process steps stay consistent between them. See our IATF 16949 core tools guide for how these documents fit together.