What Is Key Characteristics?

Definition

Key characteristics are product or process features whose variation has a significant effect on fit, performance, service life or safety, and which therefore need extra control. The term is used mainly in aerospace, for example in AS9100 and AS9103.

Key Characteristics in Simple Terms

Not every dimension on a drawing matters equally. Key characteristics are the few that really drive whether a part works. Aerospace customers mark them on drawings or in specifications, and suppliers may add their own. Automotive uses a similar idea under the name special characteristics.

How It Works

  1. Identify: use the design, customer requirements and the FMEA to choose the features where variation matters most.
  2. Mark: flag them on the drawing, the process flow diagram and the control plan.
  3. Control: apply stronger controls such as SPC, capability targets, error-proofing or 100 percent inspection.
  4. Monitor: review capability and act when variation grows.

Example

On a turbine engine bracket, the bore position that locates a bearing housing is marked as a key characteristic. The supplier machines it with a dedicated fixture, measures every part on a CMM and plots the results on a control chart. When the process shows a stable Cpk above the customer target, the agreed inspection frequency can be reduced.

Why It Matters

Focusing control effort on the few features that matter improves product safety and avoids wasting inspection time on features that do not. OperaHive FMEA software connects the FMEA with control plans, so a characteristic flagged in the risk analysis carries through to its controls.

FAQ

Frequently Asked Questions

Still unsure? Ask our team.

What is the difference between key characteristics and special characteristics?

They describe the same idea. Key characteristics is the aerospace term, used in AS9100 and AS9103. Special characteristics is the automotive term, used in IATF 16949 and AIAG manuals.

Who defines key characteristics?

Usually the design owner or customer, on the drawing or specification. Suppliers can add their own key process characteristics based on their process risk analysis.

What are key characteristics in manufacturing?

Key characteristics are product or process features whose variation has a significant effect on fit, function, safety, performance or service life. They need extra control and monitoring.

What is a key characteristic in AS9100?

In AS9100 a key characteristic is an attribute or feature whose variation significantly affects product fit, form, function, performance, service life or producibility. AS9103 sets out how to manage variation in them.

What is a key characteristic example?

Examples include the bore diameter of a bearing housing, the torque on a safety critical fastener, the hardness of a heat treated shaft or the wall thickness of a pressure vessel.

How are key characteristics identified?

They come from design analysis, customer drawings, DFMEA and PFMEA, field failure data and process capability studies. Each one is marked on the drawing and carried into the control plan.

How do you control key characteristics?

Typical controls include statistical process control, capability studies, error proofing, 100 percent inspection where capability is low and a documented reaction plan for out of tolerance results.

What capability is required for key characteristics?

Customers often expect Cpk of at least 1.33 for ongoing production and 1.67 for initial studies. Where this is not met, extra inspection is usually required until the process improves.

What is the difference between a key product characteristic and a key process characteristic?

A key product characteristic is a feature of the part itself, such as a dimension. A key process characteristic is a process setting, such as temperature or pressure, that drives a key product characteristic.

What symbols are used for key characteristics on drawings?

Symbols vary by customer. Many use a diamond, inverted triangle or shield next to the dimension. Suppliers must use the symbol defined in the customer requirements.

Put Key Characteristics Into Practice

Book a demo and see how OperaHive handles this on your own parts, processes and documents.