Action Priority in Simple Terms
For years teams ranked FMEA risks with the Risk Priority Number, which multiplies severity, occurrence and detection. The 2019 AIAG-VDA handbook replaced RPN with AP tables. Instead of a single product, AP looks up the actual combination of the three ratings, giving the most weight to severity, then occurrence, then detection.
How It Works
| AP rating | What the team must do |
|---|---|
| High | Identify an action to improve prevention or detection controls, or justify why current controls are adequate |
| Medium | Should identify an action, or justify why current controls are adequate |
| Low | Could identify an action to improve controls |
AP is used in both DFMEA and PFMEA. The handbook states that AP is not a ranking of risks against each other. It is a priority for taking action.
Example
A PFMEA line for a brake hose crimp has severity 9, occurrence 4 and detection 7. Its RPN would be 252, which some teams might have ignored under a threshold of 300. The AP table rates this combination High, so the team adds an in-line crimp force monitor and updates the control plan.
AP vs RPN
- RPN treats the three ratings as equal, so a severity 10 risk can score lower than a nuisance risk.
- AP puts severity first, so serious failures cannot hide behind good detection.
- RPN thresholds were often misused as targets. AP removes the single number.
The OperaHive FMEA software calculates Action Priority using the AIAG-VDA method and tracks the resulting actions. See the FMEA guide for the full method.