What Is Where-Used Analysis?

Definition

Where-Used Analysis is a search through the bill of materials structure that lists every assembly, sub-assembly and finished product that contains a given part or material.

Where-Used Analysis in Simple Terms

A normal BOM explosion goes down: start with a product and list its parts. Where-used goes up: start with a part and list everything it goes into. A single fastener or resin grade may appear in dozens of products.

When It Is Used

  • Engineering changes: before approving an engineering change request, check every product the change affects.
  • Supplier or material problems: find which products could contain a suspect component.
  • Obsolescence: plan replacement when a part is discontinued.
  • Compliance: find products affected by a restricted substance, for RoHS or REACH.
  • Costing: see which products are affected by a price change.

Example

An engineer wants to change the plating on screw 50-0112. A where-used search shows it is in 3 sub-assemblies and 14 finished products, including one sold to an aerospace customer that requires approval for any change. The change request is updated to include that customer notification before release.

Why It Matters

Without where-used data, changes are approved with only part of the picture, and side effects show up later in production or at the customer. Accurate results depend on accurate BOMs, including both the engineering BOM and the manufacturing BOM. The OperaHive PLM software manages EBOMs and MBOMs with where-used impact tracking. Read more in our post on the bill of materials in manufacturing.

FAQ

Frequently Asked Questions

Still unsure? Ask our team.

What is where-used analysis?

Where-used analysis finds every assembly and product that contains a given part or material. It works upwards through the bill of materials from the component.

BOM explosion vs where-used: what is the difference?

A BOM explosion lists all parts inside a product. Where-used works the other way and lists all products that contain a given part.

What is a multi-level where-used report?

It follows the part up through every level of the structure, from the sub-assembly that uses it directly to the top-level finished products.

What is a single-level where-used report?

A single-level report shows only the parent assemblies that use the part directly, without going further up the structure.

When is where-used analysis needed?

It is used for engineering changes, part obsolescence, supplier quality problems, recalls, cost changes and planning the impact of a material shortage.

What is a where-used analysis example?

A resistor is going obsolete. Where-used shows it is in three circuit boards, which go into five products, so engineering knows which designs and customers are affected.

How does where-used analysis support engineering change management?

Before approving a change, engineers run where-used to see every affected assembly, drawing and product, so nothing is missed and stock and work in progress can be planned.

What is the difference between where-used and traceability?

Where-used is based on the design BOM and shows which products could contain a part. Traceability uses production records to show which actual units did.

What software is used for where-used analysis?

PLM and ERP systems run where-used queries from the stored bill of materials. Results are only as accurate as the BOM data in the system.

What are common where-used analysis mistakes?

Using an out-of-date BOM, checking only one level, ignoring alternate parts and not including service or spare part structures.

Put Where-Used Analysis Into Practice

Book a demo and see how OperaHive handles this on your own parts, processes and documents.