What Is a Bill of Materials (BOM)? Types, Examples and Best Practices

OperaHive teamManufacturing quality specialists
  • Published:
  • Reading time: 7 min read

Expert written and reviewed by the OperaHive team

Add OperaHive as a preferred source on Google

Summarise this article with:

Bill of materials in manufacturing: a multi-level BOM tree for a gear pump with engineering BOM and manufacturing BOM views

Key Takeaways

  • A bill of materials (BOM) is the complete, structured list of parts, materials and quantities needed to make a product.
  • The main types are the engineering BOM (EBOM), the manufacturing BOM (MBOM), the sales BOM and the service BOM. Each one describes the same product for a different purpose.
  • The engineering BOM shows how the product is designed; the manufacturing BOM shows how a plant actually builds it, including process materials and packaging.
  • Most BOM problems come from copies that drift apart: an engineering change that never reaches the MBOM, or a spreadsheet nobody updated.
  • BOM management software keeps one controlled structure, links revisions and changes, and shows where every part is used.

Introduction

Every product a factory makes starts with a list: which parts, which materials, how many of each and how they fit together. That list is the bill of materials in manufacturing, and almost every department depends on it. Engineering defines it, purchasing buys from it, planning schedules from it, production builds from it and finance costs from it.

When the BOM is right, work flows. When it is wrong, the wrong parts are ordered, the line stops and the cost estimate is off. This article explains what a BOM is, the different types with a worked example, how an engineering BOM differs from a manufacturing BOM, and the best practices that keep BOMs accurate.

What Is a Bill of Materials (BOM)?

A bill of materials (BOM) is a structured list of every component, subassembly and raw material needed to make one unit of a product, with the quantity of each. In short, a bill of materials in manufacturing is the recipe for the product.

What a BOM line usually contains

  • Part number: the unique identifier for the item.
  • Description: a short, clear name.
  • Quantity: how many are needed per parent assembly.
  • Unit of measure: pieces, kilograms, metres or litres.
  • Level: where the item sits in the product structure.
  • Revision: which version of the part is used.
  • Make or buy: whether the part is made in-house or purchased.
  • Reference details: find number, drawing reference or approved alternatives.

A BOM can be single-level, listing only the direct components of one assembly, or multi-level, showing the full tree from the finished product down to raw materials.

A Multi-Level BOM Example

Here is a simplified multi-level BOM for a small gear pump. Level 0 is the finished product; each level below it is one step further down the structure.

LevelPart numberDescriptionQtyMake or buy
0GP-100Gear pump assembly1Make
1GP-110Pump housing, machined1Make
2RM-AL-60Aluminium casting1Buy
1GP-120Gear set1Make
2GP-121Drive gear with shaft1Make
2GP-122Driven gear1Make
1GP-130End cover1Buy
1GP-140Seal kit1Buy
1HW-M6-20M6 x 20 cap screw6Buy

Even this small example shows why structure matters. If the drive gear changes, the BOM tells you exactly which assemblies are affected, which stock to check and which cost to update.

Types of Bill of Materials

The same product can be described by several BOMs, each written for a different job.

BOM typeWho uses itWhat it shows
Engineering BOM (EBOM)Design engineeringThe product as designed: parts, assemblies and drawings, usually from CAD
Manufacturing BOM (MBOM)Production, planning, purchasingThe product as built in a plant: process materials, packaging, phantom assemblies and build order
Sales or configurable BOMSales and order entryThe options a customer can choose and the parts each option adds
Service BOMAfter-sales and maintenanceSpare parts and service kits, as replaced in the field

For most manufacturers, the two that matter every day are the engineering BOM and the manufacturing BOM.

Engineering BOM vs Manufacturing BOM

The question of engineering BOM vs manufacturing BOM comes up in almost every plant, because the two look similar but serve different people.

Engineering BOM (EBOM)Manufacturing BOM (MBOM)
PurposeDefines the product as designedDefines how a plant builds it
OwnerDesign engineeringManufacturing or industrial engineering
StructureFollows the design and CAD assembliesFollows the build sequence and work centres
Extra itemsUsually noneGlue, grease, labels, packaging, consumables
Per plantOne for the productCan differ by plant or line
FeedsDrawings, design reviews, change controlMRP, routings, work orders, costing

In the gear pump example, the EBOM lists the housing, gears, cover, seals and screws. The manufacturing BOM adds the thread-locking compound for the screws, the test oil used in the leak test and the packaging box, and may group the gear set as a phantom assembly that is built and fitted in one step.

The most common problem is drift: engineering releases Rev C of a part, but the MBOM in one plant still builds Rev B. Always create the MBOM from the released EBOM and review the differences every time the EBOM changes.

Why BOM Errors Are So Costly

A BOM error rarely stays in one place. Because so many processes read from the BOM, one wrong line spreads quickly:

  • Purchasing orders the wrong part or the wrong quantity.
  • Planning shows stock that cannot actually be used.
  • Production stops when a part is missing at the line.
  • Quality inspects to an old revision.
  • Finance quotes and costs the product on the wrong materials.
  • Service ships the wrong spare part to a customer.

Most of these errors come from the same root causes: several copies of the BOM in spreadsheets, changes that are emailed instead of controlled, and no clear view of where a part is used.

BOM Best Practices

These habits keep a bill of materials in manufacturing accurate as products, plants and changes multiply:

  1. Keep one source of truth. Every department should read the same controlled BOM, not its own copy.
  2. Use clear, unique part numbers. Never reuse a number for a different part.
  3. Control revisions. Release each BOM revision through an approval, and keep the history.
  4. Link changes to the BOM. Run every change through an engineering change request and notice, so the BOM, drawings and stock are updated together.
  5. Derive the MBOM from the EBOM. Build manufacturing BOMs from the released engineering BOM and review differences on each change.
  6. Know where a part is used. A where-used view shows every assembly and product a change will affect.
  7. Include everything production consumes. Add process materials and packaging to the MBOM so planning and costing are complete.
  8. Review BOMs regularly. Compare BOM quantities with actual consumption and fix the gaps.

When to Use BOM Management Software

Spreadsheets are fine for a single product with a handful of parts. Once you have many products, shared components, frequent changes or more than one plant, BOM management software pays for itself in avoided errors.

  • One controlled structure for EBOMs and MBOMs, with revision history.
  • Engineering change control that updates the BOM, drawings and affected orders together.
  • Where-used and impact views before a change is approved.
  • Direct links to MRP, routings and product costing.

OperaHive PLM software manages parts, drawings, revisions and multi-level BOMs, and builds plant-specific manufacturing BOMs from the released engineering BOM. Engineering change management controls every BOM revision, and the same structure feeds MRP software and product costing, so planning and cost always use the current BOM.

Conclusion

The bill of materials in manufacturing is the backbone of your product data. Engineering, purchasing, planning, production, quality and finance all depend on it, so its accuracy decides how smoothly the whole plant runs.

Know which BOM type each team needs, keep the engineering and manufacturing BOMs connected, control every change and keep one source of truth. Get those right and most BOM problems never reach the shop floor.

Tired of BOM spreadsheets? See EBOMs, MBOMs and engineering changes managed in one place, on your own products, in a free 30-minute demo.

Book a demo
FAQ

Frequently Asked Questions

Still unsure? Ask our team.

What is a bill of materials in manufacturing?

A bill of materials in manufacturing is a structured list of every part, subassembly and raw material needed to make one unit of a product, with the quantity, unit of measure and revision of each item.

What is the difference between an engineering BOM and a manufacturing BOM?

An engineering BOM (EBOM) describes the product as designed by engineering. A manufacturing BOM (MBOM) describes how a specific plant builds it, adding process materials, packaging and the build sequence. The MBOM should be created from the released EBOM.

What is a multi-level BOM?

A multi-level BOM shows the full product structure, from the finished product at level 0 down through subassemblies to raw materials, with each item shown under its parent.

What is BOM management software?

BOM management software keeps BOMs in one controlled system with revisions, change control and where-used views, and connects them to planning, purchasing and costing. It replaces separate spreadsheet copies that drift apart.

Who is responsible for the BOM?

Design engineering usually owns the engineering BOM, and manufacturing or industrial engineering owns the manufacturing BOM. Changes to either should go through a controlled engineering change process.

Manage Every BOM in One Place

Book a demo and see engineering BOMs, manufacturing BOMs and engineering changes working together on your own products.