What Is Change Control?

Definition

Change Control is the formal process for proposing, reviewing, approving and implementing changes to a product, process or document, so that every change is assessed for impact before it happens.

Change Control in Simple Terms

Small changes cause big problems when nobody checks the knock-on effects. A new material, a moved machine or a revised drawing can affect fit, function, the FMEA, the control plan, stock and customer approval. Change control makes sure the right people look at a change before it is released.

How It Works

  1. Request: someone raises an engineering change request with the reason and proposed change.
  2. Impact review: engineering, quality, production and purchasing assess effects on parts, BOMs, tooling, stock, documents and customer approvals.
  3. Approval: a change board or named approvers accept or reject it.
  4. Release: an engineering change notice communicates what changes and from when.
  5. Implementation and verification: documents are updated, old stock is handled and the result is checked.

In automotive, many product and process changes need customer notification and sometimes a new PPAP before shipping.

Example

Engineering wants to switch a plastic housing to a cheaper resin. The impact review finds the material appears in three part numbers, one of them a safety part, and that the change needs customer approval. The team runs validation tests, submits a PPAP, sets a cut-in date and uses up old stock before release.

Common Mistakes

  • Making informal changes on the shop floor that never reach the drawings.
  • Skipping the where-used check.
  • Releasing a change without telling the customer when required.

OperaHive engineering change management handles change requests and notices, BOM revisions, approvals and impact reviews.

FAQ

Frequently Asked Questions

Still unsure? Ask our team.

What is the difference between an ECR and an ECN?

An engineering change request proposes a change and starts the review. An engineering change notice announces an approved change and tells people what to do.

Does every change need customer approval?

No. It depends on the change and your customer-specific requirements. In automotive, changes to design, material, process, location or supplier usually need notification and often a new PPAP.

What is change control in manufacturing?

Change control is the formal process for proposing, reviewing, approving, carrying out and recording changes to products, processes, documents or equipment. It makes sure changes do not cause unexpected quality, safety or delivery problems.

What are the steps of the change control process?

Most change control processes follow these steps:

  • raise a change request
  • assess impact and risk
  • approve or reject at a review board
  • plan and implement the change
  • verify and close with records
Who is responsible for change control?

A change owner drives each change, while a change control board with engineering, quality, production and purchasing reviews and approves it. Quality usually owns the overall process.

What is a change control board?

A change control board is a cross-functional group that reviews proposed changes, judges their impact on cost, quality, schedule and customers, and decides whether to approve, reject or defer them.

What is a change control example?

A plant wants to switch to a cheaper coolant. The request goes to the board, which checks effects on surface finish, corrosion and safety data. After a trial run and customer notification, the change is approved and documents updated.

What is the difference between change control and change management?

Change control is the formal procedure for approving and recording specific changes. Change management is broader and covers how people and organisations adopt changes, including training and communication.

What does IATF 16949 require for change control?

IATF 16949 requires a documented process to control product and process changes, including risk assessment, verification and validation, and customer notification or approval where the customer requires it.

What are common change control mistakes?

Common mistakes include making changes on the shop floor without a request, skipping impact assessment, not updating the FMEA and control plan, and forgetting to notify the customer.

Put Change Control Into Practice

Book a demo and see how OperaHive handles this on your own parts, processes and documents.