What Is Verification and Validation (V&V)?

Definition

Verification and Validation (V&V) are two checks used in product development. Verification confirms the design meets its specified requirements, and validation confirms the product meets the needs of the user in its real conditions of use.

V&V in Simple Terms

A short way to remember it: verification asks "did we build it right?" and validation asks "did we build the right thing?". A part can pass every drawing check and still fail in the field if the requirements were wrong.

VerificationValidation
QuestionDoes it meet the specification?Does it work for the user?
Typical methodsCalculations, inspections, lab tests, design reviewsVehicle or field trials, customer testing
TimingThroughout designOn production-representative parts

How It Works

In automotive, planned tests are listed in the DVP&R (design verification plan and report), which links each requirement and DFMEA risk to a test and records the result. Validation of the production process follows in the later APQP phases, with trial runs and PPAP.

Example

A plastic clip is verified by measuring its dimensions and running a pull-out test to the specified 150 N. It is then validated by fitting it to vehicles that run a durability route in hot and cold climates, where the team checks that it does not rattle or break.

Why It Matters

  • Verification catches design errors before tooling is made.
  • Validation catches wrong or missing requirements.
  • Together they provide evidence for customers and standards such as IATF 16949.

Launch deliverables such as these can be tracked by phase in OperaHive APQP software.

FAQ

Frequently Asked Questions

Still unsure? Ask our team.

What is verification and validation?

Verification and validation (V&V) are two checks on a product. Verification confirms the design meets its specified requirements; validation confirms the product works for its intended use.

Verification vs validation: what is the difference?

Verification checks that the product meets its specified requirements. Validation checks that it meets the intended use and user needs.

What is an easy way to remember verification vs validation?

Verification asks "did we build the product right?" Validation asks "did we build the right product?"

Which comes first, verification or validation?

Verification usually comes first and runs throughout design. Validation is normally done later on parts made by production or production-representative processes.

What are examples of verification and validation?

Verification examples include drawing reviews, dimensional checks and lab tests against the specification. Validation examples include field trials, vehicle durability tests and customer use testing.

What are verification methods?

The four classic verification methods are inspection, analysis, demonstration and test. Each requirement is assigned at least one method.

What is a DVP&R?

A DVP&R (Design Verification Plan and Report) lists each test, its acceptance criteria, sample size, timing and result. It is widely used in automotive to plan and record design verification.

What does ISO 9001 require for verification and validation?

ISO 9001 requires design verification to confirm outputs meet inputs and validation to confirm the product meets the requirements for its intended use, with records kept.

What is process validation?

Process validation shows that a manufacturing process consistently makes parts that meet requirements. It is required when the output cannot be fully checked afterwards, as with welding or heat treatment.

Who is responsible for verification and validation?

Design engineering usually owns verification, with test labs doing the work. Validation often involves engineering, quality and the customer, since it checks real use conditions.

Put It Into Practice

Book a demo and see how OperaHive handles this on your own parts, processes and documents.