What Is Total Productive Maintenance (TPM)?

Definition

Total Productive Maintenance (TPM) is an approach to equipment care in which operators, maintenance and management work together to prevent breakdowns, defects and losses. Its aim is equipment that is always ready to run and make good parts.

TPM in Simple Terms

In a traditional plant, operators run machines and maintenance fixes them when they break. TPM changes that. Operators clean, inspect and lubricate their own machines every shift, so they spot loose bolts, leaks and wear early. Maintenance staff then focus on planned work and improvements.

TPM grew out of Japanese industry and is closely linked to lean manufacturing. Progress is often measured with OEE.

The 8 Pillars of TPM

PillarWhat it covers
Autonomous maintenanceOperators do daily cleaning, checks and lubrication
Planned maintenanceScheduled preventive maintenance based on time or usage
Focused improvementSmall teams remove specific losses, in the spirit of kaizen
Quality maintenanceKeep equipment in a condition that cannot make defects
Early equipment managementUse lessons learned when buying or designing new equipment
Training and educationBuild operator and technician skills
Safety, health and environmentRemove hazards from equipment and work
TPM in administrationApply the same ideas to office processes

Example

An injection moulding cell suffers frequent short stops. Operators start a five minute check at each shift start covering hydraulic oil level, nozzle condition and water lines, and log any abnormality. Within a few months two worn hoses and a sticking valve are found and fixed before they cause a breakdown, and short stops fall noticeably.

Common Mistakes

  • Treating TPM as a maintenance department project rather than a plant-wide one.
  • Starting autonomous maintenance without training operators first.
  • Collecting checksheets that nobody reviews or acts on.

The OperaHive TPM software manages breakdowns, preventive maintenance and operator checks, and tracks OEE, MTBF and MTTR.

FAQ

Frequently Asked Questions

Still unsure? Ask our team.

What does TPM stand for?

TPM stands for Total Productive Maintenance, an approach in which operators and maintenance staff share responsibility for keeping equipment in good condition.

What is TPM in manufacturing?

TPM is a maintenance approach that aims for no breakdowns, no small stops and no defects caused by equipment. Operators do daily care while maintenance focuses on planned and specialist work.

What are the 8 pillars of TPM?

Autonomous maintenance, planned maintenance, focused improvement, quality maintenance, early equipment management, training and education, safety health and environment, and TPM in administration.

TPM vs preventive maintenance: what is the difference?

Preventive maintenance is scheduled work done by maintenance staff. TPM is a wider approach that includes preventive maintenance but also operator care, improvement and training.

What is the main goal of TPM?

The goal of TPM is to maximise equipment effectiveness by removing breakdowns, setup losses, small stops, speed losses and quality defects.

How is TPM measured?

TPM is mainly measured with OEE, which multiplies availability, performance and quality. Teams also track breakdown counts, MTBF, MTTR and the share of planned versus unplanned maintenance.

What is autonomous maintenance in TPM?

Autonomous maintenance means operators clean, inspect, lubricate and tighten their own equipment and report abnormal conditions, so problems are found before they cause failures.

Who developed TPM?

TPM was developed in Japan in the 1970s, with Seiichi Nakajima and the Japan Institute of Plant Maintenance credited for defining and spreading the approach.

What are the 6 big losses in TPM?

Breakdowns, setup and adjustments, small stops, reduced speed, startup rejects and production rejects. Each one reduces OEE.

How do you implement TPM?

Start with a pilot machine, measure OEE, clean and restore the equipment, train operators in autonomous maintenance and set up planned maintenance before rolling out to other lines.

What are the benefits of TPM?

Fewer breakdowns, higher OEE, better product quality, safer workplaces and operators who take ownership of their equipment.

Put It Into Practice

Book a demo and see how OperaHive handles this on your own parts, processes and documents.