What Is Preventive Maintenance?

Definition

Preventive maintenance is planned maintenance carried out at set intervals, by time or by usage, to keep equipment in good condition and reduce the chance of unplanned breakdowns.

Preventive Maintenance in Simple Terms

Instead of waiting for a machine to fail, the maintenance team services it on a schedule: changing filters, checking belts, lubricating slides and replacing worn parts before they cause downtime.

It is one of the pillars of TPM, alongside autonomous maintenance done by operators.

Types of Maintenance Compared

ApproachTriggerTypical use
Breakdown (reactive)Machine failsLow-cost, non-critical equipment
Preventive, time-basedCalendar intervalWeekly, monthly or annual service
Preventive, usage-basedCounter, hours or cyclesPresses, compressors, moulds
PredictiveMeasured condition, such as vibrationCritical, high-value assets

Example

A stamping plant had repeated hydraulic failures on a 400 tonne press. It set a usage-based plan to change the hydraulic filter every 250 running hours and check oil condition monthly. Unplanned stops on the press fell, and mean time between failures improved over the following quarter.

Why It Matters

  • Fewer unplanned stops and better OEE.
  • More stable processes, since worn equipment often causes quality drift.
  • IATF 16949 expects a documented total productive maintenance system with planned maintenance objectives.

A common mistake is setting intervals once and never reviewing them against breakdown history. OperaHive TPM software runs preventive plans by date or by counter and reports MTBF and MTTR from maintenance records.

FAQ

Frequently Asked Questions

Still unsure? Ask our team.

What is preventive maintenance?

Preventive maintenance is planned work, such as inspection, lubrication and part replacement, done at set intervals to reduce the chance of equipment failing.

What is the difference between preventive and predictive maintenance?

Preventive maintenance is done at fixed intervals of time or usage. Predictive maintenance is done when measured condition, such as vibration or temperature, shows it is needed.

What is the difference between preventive and corrective maintenance?

Preventive maintenance is planned before a failure happens. Corrective maintenance is done after a fault or breakdown to restore the equipment.

How often should preventive maintenance be done?

Start from the equipment maker's recommendations, then adjust intervals using your own breakdown and inspection history.

What is a preventive maintenance example?

Changing the hydraulic oil and filters on a press every 2,000 running hours is a typical example. Others include checking belt tension weekly and calibrating sensors every six months.

What are the types of preventive maintenance?

Common types are time-based maintenance, usage-based maintenance by hours or cycles, and condition-based maintenance triggered by inspection results.

What should a preventive maintenance checklist include?

A checklist usually lists the machine, task, interval, tools and spares, safety steps such as lockout, acceptance criteria and a space to record findings and sign off.

What are the benefits of preventive maintenance?

It reduces unplanned downtime, extends equipment life and improves safety. It also helps keep process capability stable, because worn equipment often causes quality problems.

Is preventive maintenance required by IATF 16949?

Yes. IATF 16949 requires a documented total productive maintenance system, including planned maintenance objectives and records for key process equipment.

Who is responsible for preventive maintenance?

The maintenance team usually plans and performs the work, while operators often do simple daily checks such as cleaning and lubrication under autonomous maintenance.

What is a PM compliance rate?

PM compliance is the percentage of scheduled preventive maintenance tasks completed on time in a period. Many plants aim for 90% or more.

Put Preventive Maintenance Into Practice

Book a demo and see how OperaHive handles this on your own parts, processes and documents.