SOP in Simple Terms
An SOP is the written rule for how a process runs. It answers what is done, by whom, in what order and with which records. Typical SOPs cover goods receipt, handling of nonconforming product, calibration, internal audits and engineering changes.
Because an SOP is part of the quality management system, it must be reviewed, approved and kept under document control, so people only use the current revision.
SOP vs Work Instruction
| SOP | Work instruction | |
|---|---|---|
| Scope | A whole process, often across departments | One task at one workstation |
| Detail | Who, what, when and records | Step by step how, often with photos |
| Audience | Supervisors, engineers, quality | Operators and technicians |
| Example | Control of nonconforming product | How to set up press 4 for part 1120 |
Many plants link each SOP to the work instructions that carry out its steps.
Example
A machining plant writes an SOP for handling rejected parts. It states that the inspector tags and segregates the parts, the quality engineer raises a nonconformance report within one shift, and the review board decides on rework, scrap or use as is. Each step names the record that must be completed.
Common Mistakes
- Writing the SOP to pass an audit rather than to match how the work is really done.
- Too much detail, so the SOP becomes a long work instruction nobody reads.
- Printed copies left on the shop floor after a new revision is released.
- No owner, so the SOP is never reviewed when the process changes.
With OperaHive document control software, SOPs go through approval workflows with revision history and read acknowledgements. Auditors to ISO 9001 will usually check that procedures are current and followed.