What Is Hazard Identification and Risk Assessment (HIRA)?

Definition

Hazard Identification and Risk Assessment (HIRA) is a systematic process for finding workplace hazards, judging how likely and how severe the harm could be, and deciding which controls are needed to reduce the risk.

HIRA in Simple Terms

A hazard is anything that could cause harm, such as a moving machine part, a chemical or work at height. Risk is the combination of how likely the harm is and how bad it would be. HIRA lists the hazards for each task or area, rates the risk and sets controls. ISO 45001 requires organisations to identify hazards and assess occupational health and safety risks.

How It Works

  1. Break work into tasks or areas.
  2. Identify hazards through walk-throughs, operator input, incident records and near misses.
  3. Rate the risk, often with a likelihood x severity matrix.
  4. Choose controls using the hierarchy of controls.
  5. Re-rate the residual risk and assign owners.
  6. Review after incidents, changes or at set intervals.

The hierarchy of controls, from most to least effective, is: elimination, substitution, engineering controls, administrative controls, and personal protective equipment.

Example

A HIRA for a manual deburring station finds hand injury risk from sharp edges and hand-arm vibration from an air tool. The team replaces the air tool with a low-vibration model (substitution), adds a fixture so the part is not hand-held (engineering control), and specifies cut-resistant gloves as a final layer.

Why It Matters

HIRA moves safety from reacting to injuries to preventing them. It should be updated when incident reporting shows new hazards. OperaHive incident reporting software helps teams record incidents and near misses, investigate root causes and assign corrective actions.

FAQ

Frequently Asked Questions

Still unsure? Ask our team.

What is the difference between a hazard and a risk?

A hazard is something that can cause harm. Risk is the chance that the harm happens combined with how severe it would be.

How often should a HIRA be reviewed?

Review it after any incident, near miss or change to the process, equipment or materials, and also at a regular interval set by the company, often once a year.

What is hazard identification?

Hazard identification is the process of finding anything in the workplace that could cause harm, such as machinery, chemicals, noise, manual handling or electrical sources, before people are hurt.

What is the full form of HIRA?

HIRA stands for hazard identification and risk assessment. It combines finding hazards with judging the risk each one poses and deciding which controls are needed.

How do you carry out hazard identification?

Walk the workplace, review tasks step by step, talk to workers, check incident and near miss records, and read safety data sheets and manufacturer instructions. Record each hazard with who could be harmed and how.

What are the types of workplace hazards?

Common categories are:

  • Physical (noise, heat, moving parts)
  • Chemical (solvents, fumes)
  • Biological
  • Ergonomic (lifting, repetitive work)
  • Psychosocial (stress, fatigue)
  • Electrical
What is the hierarchy of controls?

The hierarchy of controls ranks risk controls from most to least effective: elimination, substitution, engineering controls, administrative controls and personal protective equipment (PPE).

Is hazard identification required by ISO 45001?

Yes. ISO 45001 requires organisations to set up an ongoing process for hazard identification and assessment of OH&S risks, covering routine and non-routine activities, contractors and changes.

Who is responsible for hazard identification?

Employers hold legal responsibility, but supervisors, safety officers and workers all take part. Involving the people doing the work gives the most accurate picture of real hazards.

What is a HIRA example in manufacturing?

For a press brake, hazards include crushing of fingers, noise and manual handling of sheets. Controls could be light curtains, two-hand controls, hearing protection and lifting aids, each with a residual risk rating.

What are common hazard identification mistakes?

Common mistakes include copying generic risk assessments, ignoring non-routine tasks such as maintenance, not involving workers and failing to review after incidents or changes.

Put It Into Practice

Book a demo and see how OperaHive handles this on your own parts, processes and documents.